7/8" Corrugated
Designed for commercial, industrial, residential, and steel-framed building applications, the 7/8” Corrugated Panel provides architects and designers a corrugated profile option which can be installed as both a roof and a wall panel. The 7/8” corrugation height creates the structural integrity required to allow installation over a solid substrate or open framing.
Testing and Approvals
- UL 580 uplift resistance tested
- UL750 fire, class A rating
- UL2219 impact resistance, Class 4
- Florida Building Code Approved
- FL29467.1-R1 - 26Ga, 50 ksi over min 7/16" OSB, 15/32" APA plywood, or ¾" plank
- FL29467.2-R1 - 24Ga, 50 ksi over min 15/32" APA plywood or ¾" plank
- FL9555.2-R5 - 26Ga min, 80 ksi steel OR 24Ga min, 50 ksi steel over 16Ga min, 50 ksi steel section
- FL9557.1-R5 - 26Ga min, 80 ksi OR 24Ga, 50 ksi over min 16Ga, 50 ksi section
Resources
Specifications

Substrates and Coatings
- High Strength Steel Gauge Options: 22 GA, 24 GA, 26 GA
- Finishes: Painted Panels, Unpainted Panels
- Anti-corrosion AZ50 Galvalume® coating for painted and AZ55 for unpainted steel
- 26 ga available in Siliconized Modified Polyester Paint Systems
- 24 and 22 ga available in PVDF (Kynar 500 or Hylar 5000) Paint System